1) The site or warehouse for storing straight-seam steel pipe products should be located in a clean and well-drained place, away from factories and mines that produce harmful gases or dust. Weeds and all debris should be removed on the field, and the steel should be kept clean;

　　2) Do not stack with materials that are corrosive to steel such as acid, alkali, salt, cement, etc. in the warehouse. Different types of steel should be stacked separately to prevent confusion and contact corrosion;

　　3) Large section steel, rails, steel plates, large diameter steel pipes, forgings, etc. can be stacked in the open;

　　4) Small and medium-sized steel bars, wire rods, steel bars, medium-diameter steel pipes, steel wires and wire ropes, etc., can be stored in a well-ventilated material shed, but must be placed on top and bottom;

　　5) Some small steels, thin steel plates, steel strips, silicon steel sheets, small-diameter or thin-walled steel pipes, various cold-rolled and cold-drawn steels, and high-priced, corrosive metal products can be stored in the warehouse;

　　6) The warehouse should be selected according to geographical conditions. Generally, an ordinary closed warehouse is used, that is, a warehouse with a roof, a wall, tight doors and windows, and ventilation devices. 1) The site or warehouse for storing straight-seam steel pipe products should be clean and clean. , Places with unobstructed drainage, away from factories and mines that produce harmful gases or dust. Weeds and all debris should be removed on the field, and the steel should be kept clean.